Humidity Banner

A/RH5-O


A/RH1-O
Product data sheet: pdfRH.pdf
Product data sheet: pdfRH-Outside Install.pdf
Product photo: image picOutside.png
Product Dimensions: pdfRH-Out-Euro
Rev 2.pdf
dxf picRH-Out-Euro
Rev 2.dxf

The A/RH Series Relative Humidity Transmitters, convert a resistance change to a linear 4 to 20 mA, 0 to 5 VDC, or 0 to 10 VDC output. The Advanced Ceramic Technology design overcomes the limitations of other resistance-based humidity sensors that utilize water-soluble polymer coatings. The Advanced Ceramic Technology enables these sensors to recover fully from condensation. This also allows the sensor to maintain its accuracy over a longer period of time. Each A/RH Series humidity transmitter is calibrated using a NIST Traceable Temperature and Humidity Chamber. For A/RH1% units, the +/- 1% accuracy specification is good for a 20% range that you provide at the time of your order.

The standard outside air configuration is based on an European style enclosure that locks out moisture with a gasketed cover and watertight fitting. They are designed to be mounted flush to an exterior wall.

Example Part Number: A/RH5-O