- FLOW
- Impeller Meters
- Insert-Small Diameter Impeller
- Insert-Standard Impeller
- Insert-Standard Impeller Hot tap
- Tee Meter, Brass
- Tee Meter, System BTU
- Monitors and Transmitters
- Local Display/BTU Monitor
- Analog & BTU Transmitters
- Ultrasonic
- Monitors
- Transducers
- Accessories
U001-0010
- Maximum Pressure At 38°C (100°F) 400psi; At 105°C (221°F) 325psi
- Wetted Materials UHMW-PE bearing, polyamide impeller, tungsten carbide shaft, EPDM O-rings
- Recommended Flow 0.3 to 15 ft/sec (0.09 to 4.5m/sec)
- Accuracy ±1.0% of rate
- Repeatability ±0.7% over recommended design flow range*
- Linearity ±0.7% over recommended design flow range*
- Rangeability 60:1
- Transducer Excitation Quiescent current 600uA@8VDC to 35VDC max.; Quiescent voltage (Vh)=Vsupply - (600mA*Zsupply); On-State (Vlow) Max 1.2VDC@40mA current limit(15 ?+0.7VDC
- Output Frequency 0.8 to 80 Hz
* =10 upstream and =5 downstream straight pipe diameters, uninterrupted flow.