The PWR Series remote wet media pressure transducers allow remote pressure sensing capability using existing plumbing runs. With no need to run plumbing lines all the way to the transducer, the installation time and cost is greatly reduced. Select either armored (6 ft.) or shielded (10 or 20 ft.) cable, depending on the application.

APPLICATIONS

• Monitoring and controlling pump differential pressure
• Chiller/boiler differential pressure drop
• CW/HW system differential pressure

Features

• Remote probes reduce need for plumbing or bypass assemblies...lower costs and reduced labor for installation
• Pushbutton zero calibration – no trim pots to adjust......maintain accuracy and prevent callbacks
• Three available models to maintain pressure accuracy: 0-50 psid, 0-100 psid and 0-150 psid

Exceptional accuracy and stability

• Dual sensor remote (wired) design
• Switch controlled dampening for high stability
• Pushbutton zero calibration – no trim pots to adjust
• Low total installed cost from eliminating tubing runs
• Switch selectable port swap feature eliminates costly replumbing when the high and low ports are improperly plumbed...change the switch setting from normal to swap – problem solved!
• Dual sensor design eliminates the requirement for a bypass valve assembly in most applications
• Switch-selectable pressure ranges...fewer models to order and stock
• Pushbutton zero adjustment...maintain accuracy and prevent callbacks