H8026-0400-3
- Input Primary Voltage 208 to 480VAC RMS††
- Number of Phases Monitored One to Three
- Frequency 50/60Hz
- Primary Current Up to 2400 amps cont. per phase††
- Internal Isolation 2000VAC RMS
- Insolation Class 600VAC RMS†††
- Temperature Range 0° to 60°C (32° F to 140°F), 50°C (122°F) for 2400A
- Humidity Range 0 - 95% non-condensing
- Systems Accuracy ±1% of reading from 10% to 100% of the rated current of the CTs...accomplished by matching the CTs with a meter and calibrating them as a system
- Output Physical Characteristics RS-485, 2 wire + shield Baud Rate 9600, 8N1 format
- Protocol Modbus RTU **(*)
** Detailed protocol specifications are available at: http://www.veris.com/modbus/* Other protocols available. Please consult factory.†† Contact factory to interface for voltages above 480VAC or current above 2400 Amps.††† Do not apply 600V Class current transformers to circuits having a phase-to-phase voltage greater than 600V, unless adequate additional insulation is applied between the primary conductor and the current transformers. Veris assumes no responsibility for damage of equipment or personal injury caused by products operated on circuits above their published ratings.