SCADA 3000 Universal Input Module

Product # FGD-3010

The SCADA 3000 Universal Input Module is an optional component for use with the SCADA 3000 system. The input channels are identical to those included on the SCADA 3000 main unit. The Universal Input Module features eight channels that can be configured to interface with several different types of sensors and transducers, including: Normally Open/Normally Closed dry contacts, digital logic, Run time accumulation, 0-5V analog, 4-20mA analog and 10K thermistor (°C & °F). The module features 12-bit resolution, differential inputs, 24V supply for powering 4-20mA loops and low-power operation. Each input is protected by a 1500 Watt transient suppressor. In addition, a microprocessor watchdog circuit is integrated to maintain system reliability. LED indicators are provided to show system power and module operation via a blinking pulse LED.

SCADA 3000 Pulse Count Module

Product # FGD-3020

The SCADA 3000 Pulse Count Module features four totalizing pulse count channels and four virtual channels that can be programmed to calculate various rates or to display count overflow. The module has four pulse count channels, each of which is capable of counting pulses at a rate of up to 10,000 pulses per second (10KHz). Each channel will totalize pulses up to one million and then reset to zero. The four virtual channels can be programmed to calculate the pulse as either pulses per second, pulses per minute or pulses per hour. The module is compatible with dry contact or solid state pulse generating devices such as relays or switches. The module may also be connected to the logic output of another solid state computer device (e.g., Open Collector, TTL, CMOS). The module includes adjustable filtering for each channel to prevent counting errors generated by the bounce from slow-moving switches.

SCADA 3000 Relay Output Module

Product # FGD-3040

The SCADA 3000 Relay Output Module is an optional component for use with the SCADA 3000 system. The output channels are identical to those included on the SCADA 3000 main unit. The Relay Output Module features eight latching relay outputs that can be used to switch equipment on and off. The relays are rated at 2 Amps at 125VAC and have integral contact protection. They may be controlled manually or automatically via a ladder program or C-program. In addition, a microprocessor watchdog circuit is integrated to maintain system reliability. LED indicators are provided to show system power and module operation via a blinking pulse LED.

SCADA 3000 Analog Output Module

Product # FGD-3050

The SCADA 3000 Analog Output Module features four analog output signals that can be configured as 4-20mA, 0-20mA, or 0-10V. The outputs can be used to control equipment, drive digital displays, or provide information to other computer devices. The individual outputs are capable of driving up to 1000 Ohms. They may be controlled automatically via a ladder program or C-program. The module also features a microprocessor watchdog circuit to maintain system reliability. LED indicators are provided to show system power and module operation via a blinking pulse LED.

Accessory Wire

Product # FGD-0010

50ft. of 22-gauge shielded wire for connecting sensors to your sensaphone.

SCADA 3000 Power Supply

Product # FGD-3100

Hard wired power supply for SCADA 3000 main power. Works with 110VAC or 220VAC.

SCADA 3000 Power Supply 110VAC

Product # FGD-3110

Plug in power supply for SCADA 3000 main power. For 110VAC outlets only.

SCADA 3000 5Ah Battery Supply

Product # FGD-3200

Battery backup kit for SCADA 3000. Backup time during a power failure is dependant on number of accessories, but 8 hours is typical.

SCADA 3000 18 Ah Battery Supply

Product # FGD-3210

SCADA 3000 Spare Fuse Kit

Product # FGD-3220

Contains additional replacement fuses for the SCADA 3000 power supply.

Accessory Wire

Product # FGD-0051

4-Conductor RS-485 Cable - SCADA expansion. Used to connect the Input/Output expansion modules to the main SCADA 3000 unit. Sold by the foot.

Serial-to-Ethernet Device Server for Sensaphone 2000 or SCADA 3000

Product # FGD-0300

The Serial-to-Ethernet Device Server allows you to access your Sensaphone 2000 or SCADA 3000 anywhere on a local LAN or the Internet. Simply connect the device to the serial port on your Sensaphone and connect the Ethernet jack to your network. The software included with the device server will route your computer's serial port to the network-connected device server, thus establishing a fast, direct connection to your Sensaphone.

Multi-Point Wireless I/O

Product # FGD-0205

The multi-point wireless I/O system is ideal if you need to connect one or two dry contacts and/or a 4-20mA transducer to a Sensaphone that is too far (or too expensive) to run cable. The system will replicate these sensors up to a distance of 600′ indoors or up to 4 miles line of site (flat terrain, raised antennas). The system includes a matched 1 Watt 900MHz transmitter and receiver. Two 24V power supplies and omnidirectional antennas are included. Built-in leds indicate RF link and dry contact status.

J Type Thermocouple/4-20mA Converter

Product # FGD-0220

The thermocouple to 4-20mA converter is useful when monitoring very high or very low temperatures that can not be monitored with a standard Sensaphone temperature sensor. Thermocouples are available in a variety of packages that may be perfectly suited to your measuring application. Each thermocouple input module provides a single channel of thermocouple input which is filtered, isolated, amplified, linearized and converted to a 4-20mA output. Isolation is provided by transformer coupling, using a proprietary technique to suppress transmission of common mode spikes or surges. The modules have excellent stability over time and do not require recalibration.

USB to RS-232 Converter

Product # FGD-0221

Configure your Sensaphone through serial communication using newer PCs not equipped with a serial port.