IMS-4000 Enterprise Monitoring Node Expansion Unit

Product # IMS-4002

The IMS-4000 Node allows IMS-4000 users to expand their infrastructure and monitor additional inputs in locations away from the IMS-4000 Host. Up to thirty-one Nodes can be used with each IMS-4000 Host. Much like the Host, the Node can monitor eight inputs for environmental conditions and or alarm contacts from other computer equipment such as UPS systems. The Node connects to the Host via a RJ-45 10/100BASE-T Ethernet and is monitored via the ConsoleView software included with the Host.

IMS-4000 Enterprise Monitoring International Node Expansion Unit

Product # IMS-4003

The IMS-4000 Node allows IMS-4000 users to expand their infrastructure and monitor additional inputs in locations away from the IMS-4000 Host. Up to thirty-one Nodes can be used with each IMS-4000 Host. Much like the Host, the Node can monitor eight inputs for environmental conditions and or alarm contacts from other computer equipment such as UPS systems. The Node connects to the Host via a RJ-45 10/100BASE-T Ethernet and is monitored via the ConsoleView software included with the Host.

IMS-4000 Dry Contact Node

Product # IMS-4010

The IMS-4000 Dry Contact Node provides eight dry contact inputs (normally open/normally closed) and works in conjunction with the IMS Host. The device communicates with the IMS-4000 Host via its Ethernet connection. The Dry Contact Node is a cost-effective solution when your application only requires monitoring of dry contacts. With this device you do not need to use Dry Contact Bridges, thus reducing cost, installation time, and space. This device includes four AA rechargeable NiMH batteries for power backup in the event of a power failure. Both main power and battery charge are monitored and can be programmed to trip alarms as well. The unit comes in a black plastic enclosure with tabs for wall mounting. Rubber feet are also included for placement on a shelf/desktop.

IMS-4000 Receiver Node for Wireless Sensors

Product # IMS-4200

The IMS-4000 Receiver Node for Wireless Sensors extends the environmental monitoring capability of your IMS-4000 system by implementing Wireless Sensor technology. The Receiver Node can work with up to 8 wireless sensors. The unit will wirelessly communicate with the sensors, then transmit their status back to your IMS-4000 host via its Ethernet connection. Wireless sensors are available to monitor Temperature, Humidity, Water on the Floor, Power, Dry Contacts, and 4-20mA signals. The sensors use mesh networking technology to create multiple communication paths between the sensors and the Receiver Node to ensure reliable communications. Sensors can also be battery powered for those installations where an outlet may not be available. A LCD is provided to show the status of all wireless sensors. The unit is powered by a plug-in adapter and has a 6V 1.3 AH rechargeable backup battery located inside the enclosure. Circuitry in the unit will maintain precise charging of the battery system.
The unit comes in a rugged plastic enclosure with tabs for wall mounting. Connections for an antenna, power supply, and Ethernet are easily accessible from the top and bottom of the unit.

IMS-4000 Receiver International Node for Wireless Sensors

Product # IMS-4200-NIST

The IMS-4000 Receiver Node for Wireless Sensors extends the environmental monitoring capability of your IMS-4000 system by implementing Wireless Sensor technology. The Receiver Node can work with up to 8 wireless sensors. The unit will wirelessly communicate with the sensors, then transmit their status back to your IMS-4000 host via its Ethernet connection. Wireless sensors are available to monitor Temperature, Humidity, Water on the Floor, Power, Dry Contacts, and 4-20mA signals. The sensors use mesh networking technology to create multiple communication paths between the sensors and the Receiver Node to ensure reliable communications. Sensors can also be battery powered for those installations where an outlet may not be available. A LCD is provided to show the status of all wireless sensors. The unit is powered by a plug-in adapter and has a 6V 1.3 AH rechargeable backup battery located inside the enclosure. Circuitry in the unit will maintain precise charging of the battery system.
The unit comes in a rugged plastic enclosure with tabs for wall mounting. Connections for an antenna, power supply, and Ethernet are easily accessible from the top and bottom of the unit.

IMS-4000 PowerGate

Product # IMS-4301

The IMS-4000 PowerGate allows you to manually or automatically switch up to 8 electrical outlets from the IMS-4000 ConsoleView Software or the IMS-4000 web page. This gives you the ability to remotely turn-on, turn-off, or cycle power (reboot) remote equipment. You can also program the system to automatically control the power to a device based on an alarm condition. The PowerGate has eight LEDs on the front panel to indicate outlet status and a 15 Amp circuit breaker for safety. It can switch a total of up to 12 amps of current at 120VAC 60Hz (all outlets combined). The unit is made for rack mounting and fits in a 1 EIA rack space (17″w x 10″d x 1.75″h).

IMS-4000 PowerGate2

Product # IMS-4302

The IMS-4000 PowerGate2 allows you to manually or automatically switch up to 8 electrical outlets from the IMS-4000 ConsoleView Software or the IMS-4000 web page. This gives you the ability to remotely turn-on, turn-off, or cycle power (reboot) remote equipment. You can also program the system to automatically control the power to a device based on an alarm condition. The PowerGate2 features individual power input circuits for each outlet thus giving you the ability to distribute the power load across multiple circuits. Two of the outlets can switch up to 10 amps (120VAC 60Hz) and the other six can switch up to 4 Amps (120VAC 60Hz). The unit is made for rack mounting with steel brackets and fits in a 1 EIA rack space (17″w x 12″d x 1.75″h).

IMS-4000 Right Angel Power Cord for PG2

Product # IMS-4413

Optional power cords for the IMS-4000 PowerGate2 outlet switching device.

IMS-4000 Dual Relay Output Module

Product # IMS-4310

The IMS-4310 Dual Relay Output Module allows you to control two devices from any IMS-4000 Host or Node. Each output may be controlled either manually or automatically. Each output has the option of providing either a dry relay contact or 12VDC power. Two switches located inside the device select the output type.

Telephone Adapter UK

Product # FGD-0055

Converts US RJ-11 telephone connector to UK style.

Mini Surge Protector-Power and Phone

Product # FGD-0067

The Traveler surge suppressor offers complete AC and phone line surge suppression for your Sensaphone and other electronic devices. The compact housing weighs less than 4 ounces. The retractable plug prevents scratching of expensive portable electronics. A set of RJ11 telephone line suppression jacks protect dialup and voice/modem lines. The suppressor offers 2 total outlets in a space saving direct plug-in format and diagnostic LEDs to warn of wiring problems and suppressor damage. $50,000 Ultimate Lifetime Insurance (USA & Canada Only).

USB to RS-232 Converter

Product # FGD-0221

Configure your Sensaphone through serial communication using newer PCs not equipped with a serial port.

Bluetooth Cell Phone Interface

Product # FGD-0230

The XLink allows your Sensaphone to dial and receive calls using any cell phone with Bluetooth technology. For example, suppose land-line telephone service was unavailable at the Sensaphone's location. By using the XLink you can provide telephone service to your Sensaphone by locating a cell phone next to the device. The XLink will send all incoming calls to the Sensaphone and when the Sensaphone needs to dial out the call will be seamlessly completed through the cell phone. The XLink is a wireless (Bluetooth) link between your Sensaphone and a cellular phone. This can be a cost-effective option considering that many cellular providers offer inexpensive options to add another phone. Perfect for access where a land line simply isn't available, the XLink is a must.

IMS 7' CAT5 Patch Cable Green

Product # IMS-4402

Standard Cat5 Ethernet cable to used for connecting IMS sensors to an IMS-4000 Host, IMS-4000 Node, or IMS-1000.

IMS 14' CAT5 Patch Cable Black

Product # IMS-4403

Standard Cat5 Ethernet cable to used for connecting IMS sensors to an IMS-4000 Host, IMS-4000 Node, or IMS-1000.

IMS 25' CAT5 Patch Cable Black

Product # IMS-4404

Standard Cat5 Ethernet cable to used for connecting IMS sensors to an IMS-4000 Host, IMS-4000 Node, or IMS-1000.

IMS RJ45 Cable Couplers (F/F)

Product # IMS-4405

Connects two Cat5 cables to extend the distance to the IMS sensor. This kit comes with a set of four connectors.

IMS -4000 Wall Mount Bracket

Product # IMS-4406

Allows the IMS-4000 Host to be mounted flat to a wall instead of being mounted in a 19″ rack.

Extra IMS-4000 Solution Manual

Product # IMS-4408

Additional copy of the IMS-4000 Owner's Manual.

Extra ConsoleView Software CD

Product # IMS-4409

Additional copy of the IMS-4000 Console View PC software.

IMS Network Camera, Panasonic Pan Tilt

Product # IMS-4421

The Panasonic BLC111A network camera is ideal for monitoring your small business property, data center, or residence. The camera can be used in combination with the IMS-1000 or IMS-4000 systems to send camera snapshots via e-mail when alarms are detected.
The camera features a 10x digital zoom function in addition to remote pan and tilt controls. This allows you to control the direction of the camera right from your web browser. The camera also has a built-in microphone so that you can hear sounds from the remote site as well. A privacy mode can be activated either at the camera, or remotely in administrator mode, which will cover the lens.

IMS Network Camera, Axis

Product # IMS-4423

The Axis M1011 is a small network camera ideal for monitoring your small business property, data center, or residence. The camera can be used in combination with the IMS-1000 or IMS-4000 systems to send camera snapshots via e-mail when alarms are detected.
The camera offers a high quality yet affordable video surveillance solution. Using progressive scan technology, the camera provides VGA images of moving objects without motion blur.
Designed to compliment modern interiors and easy to install and use, the M1011 will not look out of place in the home or office and is ideal for IP camera novices. The Axis M1011 IP security camera has a built-in web server and can be viewed over a Local Area Network (LAN), Wide Area Network (WAN) or via the Internet as a streaming IP webcam.