Accessory Wire

Product # FGD-0010

50ft. of 22-gauge shielded wire for connecting sensors to your sensaphone.

Mini Surge Protector-Power and Phone

Product # FGD-0067

The Traveler surge suppressor offers complete AC and phone line surge suppression for your Sensaphone and other electronic devices. The compact housing weighs less than 4 ounces. The retractable plug prevents scratching of expensive portable electronics. A set of RJ11 telephone line suppression jacks protect dialup and voice/modem lines. The suppressor offers 2 total outlets in a space saving direct plug-in format and diagnostic LEDs to warn of wiring problems and suppressor damage. $50,000 Ultimate Lifetime Insurance (USA & Canada Only).

Multi-Point Wireless I/O

Product # FGD-0205

The multi-point wireless I/O system is ideal if you need to connect one or two dry contacts and/or a 4-20mA transducer to a Sensaphone that is too far (or too expensive) to run cable. The system will replicate these sensors up to a distance of 600′ indoors or up to 4 miles line of site (flat terrain, raised antennas). The system includes a matched 1 Watt 900MHz transmitter and receiver. Two 24V power supplies and omnidirectional antennas are included. Built-in leds indicate RF link and dry contact status.

J Type Thermocouple/4-20mA Converter

Product # FGD-0220

The thermocouple to 4-20mA converter is useful when monitoring very high or very low temperatures that can not be monitored with a standard Sensaphone temperature sensor. Thermocouples are available in a variety of packages that may be perfectly suited to your measuring application. Each thermocouple input module provides a single channel of thermocouple input which is filtered, isolated, amplified, linearized and converted to a 4-20mA output. Isolation is provided by transformer coupling, using a proprietary technique to suppress transmission of common mode spikes or surges. The modules have excellent stability over time and do not require recalibration.

USB to RS-232 Converter

Product # FGD-0221

Configure your Sensaphone through serial communication using newer PCs not equipped with a serial port.

Serial-to-Ethernet Device Server for Sensaphone 2000 or SCADA 3000

Product # FGD-0300

The Serial-to-Ethernet Device Server allows you to access your Sensaphone 2000 or SCADA 3000 anywhere on a local LAN or the Internet. Simply connect the device to the serial port on your Sensaphone and connect the Ethernet jack to your network. The software included with the device server will route your computer's serial port to the network-connected device server, thus establishing a fast, direct connection to your Sensaphone.