- TEMPERATURE
- RTDs
- 100 Ohm Platinum Page
- 100 Ohm Low Temp Page
- 100 Ohm High Temp Page
- 1K Ohm Platinum Page
- 1K Ohm Low Temp Page
- 1K Ohm High Temp Page
- 1K Nickel RTD Page
- Balco RTD Page
- -LCD
- A/TUC2 (Backlit Display)
- Freezer Sensor
- Temperature Transmitters
- TT100 Page
- TTM100 Page
- TT1K Page
- TTM1K Page
- TT100 Ohm Low Temp Page
- TT1K Ohm Low Temp Page
- TT100 Ohm High Temp Page
- TT1K Ohm High Temp Page
- Potted Transmitters
- Freezer Sensor
- A/TUC2 (Backlit Display)
- Semiconductors
- 592 Semiconductor Page
- 592-10K Semiconductor Page
- LM 34 Semiconductor Page
- Thermistors
- CP (10K Type II) Thermistor Page
- AN (10K Type III) Thermistor Page
- AN-BC Thermistor Page
- 1.8K Thermistor Page
- 20K Thermistor Page
- 3K Thermistor Page
- 10KS Thermistor Page
- 100KS Thermistor Page
- 2252 Thermistor Page
- 10K-CSI Thermistor Page
A/TT1K-RA-24"-4X
| Product data sheet: |  Transmitter.pdf |
|
| Product instruction: | TT.pdf |
|
| Product photo: |  NEMA 4X-Duct.png |
|
| Product Dimensions: | duct-4x Rev 3.pdf |
 duct-4x Rev 3.dxf |
ACI temperature transmitters are a cost effective solution for all of your temperature measurement needs. The transmitters are accurate, durable, and reliable.
ACI produces two temperature transmitters, the A/TT100 for use with a 100 Ohm Platinum RTD and the A/TT1K for use with a 1K Ohm Platinum RTD. The transmitters produce a linear 4-20 mA output carried on a two-wire system. Optional output voltage ranges of (+1-5 or +2-10 VDC) can also be ordered. The transmitter is supplied factory calibrated, and supplied with zero and span potentiometers for field calibration. The transmitter is linear from -50 to 392°F.
The polycarbonate NEMA 4X (4X)-rigid averaging configuration has NEMA 4X rating and is designed for wet environments, it also adds a level of corrosion resistance. Sensors are wired in a series-parallel configuration to create an averaged signal from the equally spaced sensing points along the length of the Steel tubing. The enclosure has a NEMA 3R rating and is designed for wet environments. The sensor can be calibrated from -58 to 392°F. (Please note that the electronics are rated from -40 to 185°F)
Sample Part #: A/TT1K-5-RA24"-4X-4
