Temperature Banner

A/TT100-S-4X


Polycarbonate NEMA 4X Strap
Product data sheet: pdfTransmitter.pdf
Product instruction: pdfTT.pdf
Product photo: image picNEMA 4X-Strap.png
Product Dimensions: pdfstrap-4X
Rev 2.pdf
dxf picstrap-4X
Rev 2.dxf

ACI temperature transmitters are a cost effective solution for all of your temperature measurement needs. The transmitters are accurate, durable, and reliable. Numerous mounting configurations are offered.

ACI produces two temperature transmitters, the A/TT100 for use with a 100 Ohm Platinum RTD and the A/TT1K for use with a 1K Ohm Platinum RTD. The transmitters produce a linear 4-20 mA output carried on a two-wire system. Optional output voltage ranges of (+1-5 or +2-10 VDC) can also be ordered. The transmitter is supplied factory calibrated, and supplied with zero and span potentiometers for field calibration. The transmitter is linear from -50 to 392°F.

The A/TTM Series transmitters are calibrated using a high accuracy NIST traceble digital thermometer and temperature chamber at three points standard. All temperature transmitters have a five year product warranty.

The sensor can be calibrated from -58 to 392°F. (Please note that the electronics are rated from -40 to 185°F.)

The polycarbonate NEMA 4X strap on configuration has a sensor potted to the back side of a copper plate and a foam pad creates compression when the strap worm drive is tightened. The final result is a good thermal transfer with pipes that range from 2 to 5 inches in diameter.

Sample Part #: A/TT100-4-S-4X-4