- AIR QUALITY
- Duct CO2 Sensors
- Deluxe
- Standard
- Wall CO2 Sensors
- Deluxe
- Standard
- Remote Mount
- Dual Analog Outputs
- CO & NO2 Sensors
- Duct CO Sensors
- Wall CO Sensors
- Wall CO &NO2 Sensors
- CO Monitoring Station
CWLSHTDX2F
- Input Power 20 to 30VDC/24VAC; 100mA max.
- Analog Output 4-20mA, (clipped & capped)/0-5VDC/0-10VDC (selectable)
- Operating Temperature Range 0° to 50°C (32° to 122°F)
- Housing Material High impact ABS plastic
CO2 Transmitter:
- Sensor Type Non-dispersive infrared (NDIR), diffusion sampling
- Measurement Range 0-2000/5000 ppm (programmable)
- Accuracy ±30 ppm ±2% of measured value*
- Repeatability ±20 ppm ±1% of measured value
- Response Time <60 seconds for 90% step change
RH Transmitter:
- HS Sensor Fully replaceable, digitally profiled thin-film capacitive (32-bit mathematics) U.S. Patent 5,844,138
- Accuracy ±2% from 10 to 80% RH; NIST traceable multi-point calibration
- Stability ±1% @ 20°C (68°F) annually, for two years
- Operating Humidity Range 0 to 100% RH
- Operating Temperature Range 10° to 35°C (50° to 95°F)
- Temperature Coefficient ±0.1% RH/°C above or below 25°C (typical)
Temperature Transmitter:
- Sensor Type Solid-state, integrated circuit
- Accuracy ±0.5°C (±1°F) typical
- Resolution 0.1°C (0.2°F)
- Range 10° to 35°C (50° to 95°F)
Relay Contacts:
- 1 Form C (SPDT) (on models without setpoint slider option) 1A@30VDC, resistive; 30W max.
RTD/Thermistors in wall packages are not compensated for internal heating of product.EMC Conformance: EN 61000-6-3:2001 Class B, EN 61000-6-1:2001, EN 61000-3-2:2000, EN 61000-3-3:2001, EMC Test Methods: CISPR 22:1997 (Amended A1:2000, A2:2002) Class B, IEC 61000-4-2:2002, IEC 61000-4-3:2006, IEC 61000-4-4:2004, IEC 61000-4-5:2001, IEC 61000-4-6:2004, IEC 61000-4-8:2001, IEC 61000-4-11:2004.EMC Special Note: Connect this product to a DC distribution network or an AC/DC power adaptor with proper SURGE PROTECTION (EN 61000-6-1:2001 specification requirements).*Measured at NTP