![A/SCTE-50](../images/A_SCTEsmall.png)
Product data sheet: | ![]() CTE.pdf |
|
Product instruction: | ![]() |
|
Product photo: | ![]() |
|
Product Dimensions: | ![]() Rev 1.pdf |
![]() Rev 1.dxf |
The A/SCTV series current sensors monitor the current flowing to electrical equipment or buildings. The magnitude of this current is then converted into a linear 0 to 10 VDC output signal, which can be monitored by your Building Management, DDC, or PLC controller. In addition, they offer jumper selectable input ranges.
The A/SCTV series current sensors are fast acting and extremely accurate from 5% to 10% up to 100% of the FSO (Full Scale Output) depending on the model being ordered. They are factory calibrated using a NIST Traceable standard and shipped with the jumper placed in the largest jumper selectable range.
The power for the A/SCTV series current transmitter is induced from the conductor being monitored. This means that no external power supply is necessary for the installation of these sensors. Since these units have a split-core design, they make an excellent choice for existing installations because you will not have to power down the unit and disconnect any wires during the installation process.
The A/SCTV-50 current transmitter has jumper selectable ranges of 0-10, 0-20, and 0-50Amps.